Home>Products>Blown Film Extrusion Machine for HDPE/LDPE/LLDPE/PP>Two Color Striped Blown Film Machine

Two Color Striped Blown Film Machine

TWO COLOUR STRIPE PLASTIC FILM EXTRUDING MACHINE

TCS Series

Blown Film Machine - Two Colour Stripe Plastic Film Extruding Machine - TCS Series

Specifications
MODEL TCS SERIES
DESCRIPTION TCS-35S TCS-45S TCS-50S
RAW MATERIAL HDPE, LDPE, LDPE+LLDPE
FILM THICKNESS MM 0.008-0.2
FILM WIDTH(MAX) MM 550 700 850
EXTRUDING OUTPUT KG/HR 10-48 15-60 30-80
WHOLE POWER REQUIRED KW 28 32 40
OVERALL DIMENSION CM 390X155X380 390X155X380 390X155X380
NET WEIGHT KG 2200 2500 3000
EXTRUDER LOW BASE TYPE
SCREW DIAMETER MM Ø35 X 2 PCS Ø45 X 2 PCS Ø50 X 2 PCS
SCREW RATIO L/D 30:1
DRIVING V.S. MOTOR HP 20 30 40
HEATING POWER KW 9 10 11.5
SCREW SPEED RPM 20-140
COOLING BLOWER Ø2 1/2" X 2 PCS Ø2 1/2" X 4 PCS Ø3" X 4 PCS
TEMP. CONTROLLER ZONE 8 10 10
DIE SPIRAL TYPE
DIE DIAMETER MM 40 & 65 65 & 85 65 & 100
HEATING POWER KW 3 OR 5 4.5 OR 7 5 OR 9
BLOWER HP 3 5 5
AIR RING SET 1 1 1
TAKE-UP UNIT MOTOR VERTICAL LIFT TYPE
TAKE-UP D.C. MOTOR HP 1/2 1 1
TAKE-UP ROLLER WIDTH MM 600 750 900
TAKE-UP HEIGHT MM 3800 4000 4300
TAKE-UP SPEED RPM 10-80
WINDER FRICTION TYPE
WINDING ROLLER PC 1 1 1
TORQUE MOTOR KG/CM 20X1 OR 2 PCS 20X1 OR 2 PCS 20X1 OR 2 PCS
WINDING WIDTH (MAX) MM 670 820 970

OPTIONAL EQUIPMENTS: AIR COMPRESSOR, SURFACE TREATER, AUTO-LOADER, ROTATING DIE DEVICE, WATER COOLING MOLD TUBULAR-SIZE CONTROLLER, DRYER...ETC.

* SPECIFICATIONS ARE SUBJECT TO CHANGE FOR IMPROVEMENT WITHOUT ADVICE.

Relative Product:
[ page up ]

©Cherng Horng Machinery Co., Ltd. All Rights Reserved. / TEL: 886-2-29813178, 29829753 / FAX: 886-2-29813455
Address: No.2, Lane 393, Zhongzheng N. Rd., Sanchong Dist., New Taipei City 241, Taiwan / E-mail: extruder@ms8.hinet.net